PAS sensor, can DIY fixed on any bike can fix 4 wire cable and 2 steel cable more than 10 kinds of magnet disc selections for different chain wheel
Quick destuffing with double hall sensor adapt to e-bike, match with separable disc, right installation, it mainly apply to detect the PAS signal. Because of it match with 12 magnets of separable disc, so it have more accuracy than SH-SENSOR which used 6 magnets, and install easily(need not disassemble middle
axle and wheel disc), the range sense farther than SH-SENSOR which used 6 magnets, reachable farthest is 6.0 mm. Quick destuffing with double sensor consists of separable disc and disassemble sensor holder. Separable disc is two pieces disc （HALF DISC 64）,without disassemble wheel disc,
installing it in the wheel disc directly. The holder of disassemble sensor consists of three part: holder(t181-3), line board(t181-1), cover board(t181-2). Without disassembly any parts of e-bike and with bolt connection bottom bracket of holder. Separable disc have three installation form: first put the HALF DISC 64 installation to wheel disc which reference diameter is 64 mm; second through added install KM74C location holder and use together with HALF DISC 64 which install to wheel disc. After assembly in this way, it needs to drip glue into the four location hole of the disc. Third put the DIY disc installation to wheel disc.
The sensitivity of DH-SENSOR is 2-3 times than SH-SENSOR, and no error action. At default state, when the pedals go ahead, the sensor output high pulse signal, the red LED of sensor will flash. When the pedals go back, the sensor persistently output high potential, indicator bright last. In this way convenience of
customer check sensor work well or not at any time.